INDUSTRIAL COMPRESSORS

PUMPS

All Cast Iron for long life and quiet operation

Slow R.P.M. from 420 to 995 for quiet operation & long life

Tapered roller bearings at both ends of crankshaft for superior support & less friction

Precision steel connecting rods with automotive type rod insert bearings at crankshaft & needle bearings at wrist pin for long service, life, & reliability

Disc & spring valves for easy service, higher efficiency and reliability

Pistons have 4-rings for higher efficiency & less oil carry-over

Centrifugal unloader for loadless start-up every time

---

TANKS, MOTORS, CONTROLS

Powder coated ASME tanks with 4 legs on verticals, channel on horizontals.

ASME safety valves.

Metal belt guard totally enclosed.

Copper discharge & unloader tube.

Heavy duty 1725 R.P.M. industrial motors, with full 15% service factor.

---

HP	Phase	Tank  Gal./Type	Pump  R.P.M	CFM @  0-PSI	CFM@  175 PSI	LxWxH	Wt. (lbs)	Unit Model
5	1	80 Vert.	767	22.0	17.5	32x24x74	600	I518VC1
5	1	80 Horiz.	767	22.0	17.5	64x20x48	600	I518HC1
5	1	80 Vert.	420	22.0	17.5	40x24x74	700	I518VC2
5	1	80 Horiz.	420	22.0	17.5	64x20x46	700	I518HC2
7.5	1	80 Vert.	895	32.4	24.8	32x24x74	655	I718VC1
7.5	1	80 Horiz.	895	32.4	24.8	64x20x48	655	I718HC1
7.5	1	80 Vert.	585	35.0	28.1	40x24x74	760	I718VC2
7.5	1	80 Horiz.	585	35.0	28.1	64x20x46	760	I718HC2
7.5	1	120 Vert.	585	35.0	28.1	44x30x75	850	I7112VC2
7.5	1	120 Horiz.	585	35.0	28.1	69x24x50	850	I7112HC2
10	1	80 Vert.	758	45.0	35.0	32x24x74	780	I1018VC2
10	1	80 Horiz.	758	45.0	35.0	64x20x48	780	I1018HC2
10	1	120 Vert.	758	45.0	35.0	44x30x75	875	I10112VC2
10	1	120 Horiz.	758	45.0	35.0	69x24x50	875	I10112HC2
10	1	120 Vert.	570	45.0	35.0	44x30x75	1040	I10112VC3
10	1	120 Horiz.	570	45.0	35.0	69x24x50	1040	I10112HC3
5	3	80 Vert.	767	22.0	17.5	32x24x74	590	I538VC1
5	3	80 Horiz.	767	22.0	17.5	64x20x48	590	I538HC1
5	3	80 Vert.	420	22.0	17.5	40x24x74	690	I538VC2
5	3	80 Horiz.	420	22.0	17.5	64x20x46	690	I538HC2
7.5	3	80 Vert.	895	32.4	24.8	32x24x74	625	I738VC1
7.5	3	80 Horiz.	895	32.4	24.8	64x20x48	625	I738HC1
7.5	3	80 Vert.	585	35.0	28.1	40x24x74	730	I738VC2
7.5	3	80 Horiz.	585	35.0	28.1	64x20x46	730	I738HC2
7.5	3	120 Vert.	585	35.0	28.1	44x30x75	820	I7312VC2
7.5	3	120 Horiz.	585	35.0	28.1	69x24x50	820	I7312HC2
10	3	80 Vert.	758	45.0	35.0	40x24x74	770	I1038VC2
10	3	80 Horiz.	758	45.0	35.0	64x20x46	770	I1038HC2
10	3	120 Vert.	758	45.0	35.0	44x30x75	860	I10312VC2
10	3	120 Horiz.	758	45.0	35.0	69x24x50	860	I10312HC2
10	3	120 Vert.	570	45.0	35.0	44x30x75	1025	I10312VC3
10	3	120 Horiz.	570	45.0	35.0	69x24x50	1025	I10312HC3
15	3	120 Vert.	898	55.0	45.3	44x30x75	980	I15312VC2
15	3	120 Horiz.	898	55.0	45.3	69x24x50	980	I15312HC2
15	3	120 Vert.	795	61.7	50.2	44x30x82	1185	I15312VC3
15	3	120 Horiz.	795	61.7	50.2	69x24x62	1185	I15312HC3
15	3	240 Horiz.	795	61.7	50.2	84x30x68	1500	I15324HC3

Add (S) to model number for mag. starter mounted and wired (i.e I518VC1-S).

---

Options: Factory Mounted

Low Oil Control	#6304M:
Hour Meter	#HRM75M (230volt):	#HRM50M (gas):
Air Operated Auto Drain	#ADVSM:
Electronic Auto Drain	#SDV03M:
Dual Control (std. on C3)	#DC1 (C1):	#DC2 (C2)
Intake Noise Silencers	#SA100M (C1):	#SA100x2M (C2,C3):
Belt Tensioner	#184DM (5HP):	#215DM (7.5 & 10HP)	#254DM (15HP)
Time Delay 230 volt	#TD100M:
Vibration Pads 4”x4”x1”(set of 4)	#VP1004
Right from the Start Kit	#RFS001 (C1, C2)	#RFS002 (C3)
Beltguard Aftercooler	#BGAC1M – 35cfm (5, 7, 10hp)	#BGAC2M – 50cfm (15hp)