Your cart is currently empty!
Small Compact System, Fits Into A Simple Trailer Or Box Truck
The CubeVac is all the performance in a DIY package ready to be installed in a box truck or trailer.
![cube vac system](https://hypervac.com/wp-content/uploads/2023/03/Cube-Vac-System-1-edited.jpg)
Easy Maintenance:
The Vacuum is powered by a 35 HP Big block Briggs engine coupled to a 21” closed face fan with a fluid coupling device. Provisions for greasing the bearings, checking the air filter, and changing the oil are systematically placed making maintenance a breeze.
![](https://hypervac.com/wp-content/uploads/2023/07/cubevac.jpg)
Efficient Cooling:
The vacuum is fully enclosed with a cooling system designed to extract heat out the back door of your application. Exhaust is designed to be routed out the wall to eliminate heat and unwanted carbon monoxide.
![](http://hypervac.com/wp-content/uploads/2023/03/1-4-scaled.jpg)
Slide Out Filtration System:
The filtration system is mounted on a sliding tray that allows the filter bags to flow outside eliminating any dust in the engine compartment. Filtration is accomplished with 8 high quality filtration bags and debris is captured in a clean out tray.
![duct truck trailer in use](http://hypervac.com/wp-content/uploads/2015/12/Full-Trailer-Ready-to-Start.jpg)
TL-099 20 HP COMPRESSOR KIT
43.7 CFM@175psi 20hp Honda GX630
- Fuel cell
- 20gal with external fill
- 16″ Fan
- Louvers
- Relay kit
- Battery Kit
- Battery Box
- Battery Cables
- Exhaust Kit
- Manifold
- Flex Pipe
- Muffler
- Rain Cap
![](https://hypervac.com/wp-content/uploads/2023/07/GX630.jpg)